企业特殊行业经营资质信息公示
营业执照已认证 
点击图片查看原图
NEW LINE FOR PROCESSING ConTINUOSLY AND MAKING A TUBULAR FORM FROM A FLAT FELT.
This line consits of un-winding openwidth felt with infeed on an axial device (jumbo roll), prepare the felt
in atubular form, close the tubular by welding with hot air and delivery the tubular folded, out of a vertical
conveyor belt operation to be repeated several time in order to obtain a complete product multylayer.
Automation of process as follows:
- Un-winding operation through a pneumatic brake controlled and synchronized by optic laser.
- Fabric guides to delivery the felt in tubular form from un-winding station to the sealing station.
- Welding device multipurpose for “overlap welding”, “straight edge welding”, “silicon strip” welding, “felt strip welding”.
- Automated sequence and memorization of receipt with the control of temperature, blowing, speed.
- Wo*ng width (for open width felt): up to 5.400mm.
TECHNICAL CH***CTERISTICS:
Modular construction with axial unwinding for heavy rolls and tangential winding.
Special motorization with directional inverter with constant reading of diameter of roll
and synchronization with electronic sensor.
Adjustable and automatic control of roll compactness.
Electronic metering with automatic stop at the length required.
--
--
TECHNICAL DETAILS:
Wo*ng width up to 6.000 mm.
Variable speed up to 300 mt/min according to the
kind of fabric
Unwinding roll diameter up to 1.800 mm.
Winding roll diameter up to 1.200 mm.
PLC integrated for full automation
Minimum cutting size 30 mm.
Adjustable shaft to support the unwinding roll with
diameters on demand 2”, 3”, 4”, 5”, 6”.
--
-----
特殊毡制品生产线/felt line
从开幅到圆筒毡制品新型连续型生产线
这条生产线的组成由，入口处轴放卷，准备成圆筒形，
热风粘合，立体输送机，重复几次可得到多层毡制品。
自动化程度如下：
－ 退卷通过一个气动杀车及光学激光器来控制同步。
－ 面料从退卷站以筒状的形式运送到缝合站。
－ 粘合装置具有多功能，如搭接焊接，直边焊接，硅条式焊接，毡条式焊接。
－自动排序，并记忆工艺的控制温度，吹风和速度。
－工作门幅（开幅）：高达5.4米。
毡布分切机/Filt slitting machine
毡布分切机
技术特点：
- 模块化结构。
- 可调节，自动控制面料松紧度。
- 特殊监控系统，直接控制变频器，实时读取布卷
直径，由电子传感器控制同步。
技术参数：
- 工作门幅可达6米。
- 根据面料种类车速可达300米每分。
- 退卷直径可1.8米。
- 打卷直径可达1.2米
- 最小分切宽度30毫米。
- 支撑退卷的轴直径根据要求可做成2/3/4/5/6英寸。
