尼龙—6切片
特征:尼龙—6切片生产采用两端聚合、连续萃取、联系干燥和DCS控制,产品为无色透明,无机械杂志、粒度均匀的圆柱形颗粒。切片规格(直径×长)为2.0—2.5×2.0—2.5。
用途:尼龙—6切片粘度在2.4—3.6之间,可满足高速纺和拉膜生产要求,广泛用于民用丝、工业丝、尼龙6薄膜以及高强度工程塑料的生产。
Nylon 6 Chip
The nylon 6 chip plant is one of the largest plants in China The output or Eagle King nylon 6 chip is 42 kt annually. The primary technology and equipments of polymerization unit was imported from Germany. The main production technologies include two-state polymerization, continuous extraction, continuous drying and DCS control , which reaches the advanced international level.
Characteristics:
Nylon 6 chip is colorless transparent column-shaped particles with unitform particle size and no mechanical impurities. The specification of the chip is 2.0-2.5×2.0-2.5(diameter×length)
Application:
Nylon 6 chip has the viscosity of 2.4-3.6, satiosfying the requirement of high-speed spinning and drawing film. It can be widely used in the filed of civit yarn, industrial yarn, nylon 6 film and high-strength engineering plastics.
包装:
用内衬铝箔的聚丙烯编织袋或内衬铝箔的牛皮纸包装袋冲氮气包装,每袋净重25kg。
尼龙—6切片技术规格(企业标准 Q/SH3185 021-2005)
Technical specification of nyion 6 chip(enterprise standard Q/SH3185 021-2005)
执行标准:Q/SH3185 021—2005
项目 Item |
指标 |
实验方法 Qualified |
||
优等品 Superior |
一等品 First grade |
合格品 Qualified |
||
相对粘度 Relative visicosity |
M±0.05 |
M±0.10 |
M±0.15 |
PV07099.4 |
可萃取物含量,%(质量分数) ≤ Extractabie matter % ≤ |
0.6 |
0.8 |
1.0 |
PV07093.2 |
干燥后的残余水分,%(质量分数) ≤ Water remains after dry ≤ |
0.06 |
0.08 |
0.10 |
PV09012.2 |
深色杂质(黄黑粒子),粒/100g Dark impurity(yellow and black particte). Number/100g |
无(No) |
1 |
>1 |
称重法 |
注:相对粘度在2.4~3.6范围内可调,M为相对粘度中值,具体数值可由供需双方商定。
Note:The relative viscosity can be adjusted from 2.43.6 Mthe medium of relative viscosity can be determined by both sides of suppliers and buyers.
①M为相对粘度中值,具体数据可由供需双方商定。需方没有要求是,按照M=3.45或M=3.35控制。
②可实现相对粘度在2.4—3.6范围内可调。
③外观质量指标—深色杂质(黄黑粒子)为判断指标。
④外观质量指标—连刀并条率要求应低于10%,该项作为生产过程控制指标,不作为判等指标。
⑤上述质量指标为常规检验指标,特殊质量指标由供需需双方商定。
储运:
储于干燥库房,远离火源,储存和运输过程中严禁混放易燃、易挥发的有机溶剂。