企业特殊行业经营资质信息公示
营业执照已认证 
点击图片查看原图路博润ESTANE S375D TPU
ESTANE? S375D is a Shore 78D, polyester based thermoplastic polyurethane (TPU) with excellent transparency. Uses: Injection Molding Physical Properties Standard No. Units Value Hardness ASTM D2240 Shore D 78 Specific Gravity ASTM D792 g/cm3 1.28 Mechanical Tensile Stress: ASTM D412 kgf/cm2 At *** elongation 330 At 300% elongation 430 Tensile Strength ASTM D412 kgf/cm2 450 Ultimate Elongation ASTM D412 % 330 Tear Resistance (Die C) ASTM D624 kgf/cm 260 Abrasion Loss ISO 4649 mm3 25 Compression Set ASTM D395 At 23°C X22hr % 35 At 70°C X22hr % 40 Mold Shrinkage ASTM D955 m/m 0.003 Thermal Vicat Softening Temperature ASTM D1525 °C 130 *Test samples were annealed at 100oC and 24 hours at room temperature before testing. **These are typical values and should not be used for specifications. Injection Molding Guide These settings are to be used only as a guide. This is a typical injection molding temperature profile based on t
