广州市拓必森机械设备有限公司 已通过实名认证

1250S型离子风棒是目前最有效，安全性**的静电消除方式之一，与9050-4型静电发生器配合使用，静电消除率高达98%，在效工作距离高达150mm。广泛应用于包装，印刷，塑料，医药等行业，其特别的保护电路设计可以有效减少打火现象，并杜绝工作时电击操作人员的危险现象，其采用进口放电针，寿命大大延长，消除率保持时间更长久。单支离子棒长度可达4000mm，每个静电发生器可连接4支离子棒，总长度可达16000mm,其采用一次成型的铝合金型材为固定外壳，美观大方，安装更简易，采用进口高压屏蔽线确保不会对其他电路采用干扰，离子棒全体密封，防潮防尘，从根本上杜绝短路等危险事故的发生，清洁亦更为方便，只需要用软毛刷或软毛牙刷即可完成清洁工作，省时省力。特别适用于环境恶劣和高速度高要求的设备之上，如涂布，复合，凹版印刷，分切机，印刷机，流延，挤出，双拉，横切，包装，制袋，吹膜，淋膜等设备上

1250 /1250-S DS iss 1
How It Works:
The 1250 works by applying high voltage to an emitter inacontrolled
and safe way. The electric field around the emittersionisesthe
air - breaking it up into positive and negative ions. Theseionsneutralise
static electricity by being attracted to charges of theoppositepolarity.
Unused ions quickly dissipate into the atmosphere.
1250 / 1250-S
Static Eliminators
Powerful performance and
market-leading reliability make the
1250 and 1250-S the first choice
static eliminators for major
manufacturers
The 1250 and 1250-S neutralise static electricity on sheet,weband
similar processes throughout the plastics, packaging,convertingand
related industries. They are equally suitable forfood,medical,
pharmaceutical and many cleanroom applications.
Benefits and Advantages
Peformance
• The modern design gives high performance and completelyshocklessoperation.
• Stay-sharp etched emitters for better long termperformance.
• Emitters at 10mm pitch provide the most intense field ofstaticneutralisation.
• Advanced Hi-Flex polyurethane covered cable, rated at30kV,suitable for
processes from robots to high speed machinery.
Reliability
• All electronic components are fully encapsulated formaximumreliability.
• Robust construction ensures a long life of highperformance.
Ease of Use
• Simple to install - with fixed mounting studs (1250) orstudssliding in slot (1250-S).
• Operating distances of up to 150mm, best distance 20 -50mm.
• Washable and easy to clean.
• Wide range of options to extend usability. See next page.
Technical Specification
1250-S
The 1250-S has M4 x 20mm hexagon
head mounting studs which slide in a groove
on the underside of the bar.
This gives fast and simple installation.
1250
The 1250 has fixed M4 x 20mm studs
positioned 20mm from each end, and in the
middle for longer bars.
Length: From 60 mm to 6 m.
Construction: Anodised aluminium, epoxy resin, PVC andhardenedetched
emitters.
Cable: Hi-Flex polyurethane covered, 30kV screened cablewith25mm
bend radius. Standard length is 2m - longer lengths up to a
maximum of 10m can be specified at time of order (subject to
maximum load on power unit)
90° cable exit option. Bars may be supplied in series -joinedby
cable
Power Unit Use with Fraser 5.5kV Power Units - seeDatasheets.
Safety: 5mA maximum current from Power Unit. Highvoltageresistance
inside bars further limits current below 50μA.
Mounting: See sketches below to show 1250 and 1250-Soptions.200mmx
20mm steel fixing strips are supplied with each bar.
Temperature: 60°C
Standards: CE.
UL (US and C) Listing is a free of charge option.
Variants
EX - ATEX For hazardous areas see EX-1250 Datasheet.
Airboost For extending the range up to 500mm, see1250-ABDatasheet.
Balanced: For high tech applications where an accurateelectricalion balance
is required, see 1250-50 Datasheet.
High Charge: See Super 80 Datasheet - considered by many to bethemost
powerful static eliminator bar of its type available.
Combination: A passive static discharger may be combined witha1250, for
speeds over 1000m/min.