企业特殊行业经营资质信息公示
点击图片查看原图257nm连续激光器 LL257-300mw 全固态257nm的紫外激光器广泛用于紫外光固化，微电子，光盘雕刻，激光医疗，科学实验等
|
Wavelength (nm)波长 |
257± 1 |
|
Operating mode工作方式 |
连续输出 |
|
power (mW)功率 |
300mw可调 |
|
Ave power stability (over 4 hours)功率稳定性 |
<3% |
|
Transverse mode 光斑模式 |
Near TEM00 |
|
M2 factor光束质量 |
<3.0 |
|
Beam diameter at the aperture (mm)束腰光斑 |
3mm |
|
Beam divergence, full angle (mrad) |
<3mard |
|
Polarization ratio偏振比 |
>50:1, (Horizontal or Vertical Optional) |
|
Warm-up time (minutes)预热时间 |
<5 |
|
Beam height from base plate (mm) |
70 |
|
Operating temperature (°C)工作温度 |
10~35 |
|
Power supply (90-264VAC)供电 |
220v |
|
Warranty保修 |
1 year |
257nm皮秒激光器
LLPS257-200mw
| Wavelength (nm)波长 | 257±1 | |
| Operating mode工作方式 | Mode-locked | |
| Output power (W) | @ Mode-locked mode功率 | 1~200mW |
| Power stability (rms, over 4 hours)稳定性 | <5%, <3% | |
| Pulse duration(ps)脉宽 | ~50 | |
| Rep.rate(MHz)频率 | 40±1 | |
| Beam divergence, full angle (mrad)发散角 | <4 | |
| Beam diameter at the aperture (mm)光斑 | ~ 1 | |
| Beam height from base plate (mm)中心光斑 | 115 | |
| Warm-up time (minutes)上升时间 | <20 | |
| Operating temperature (C)工作温度 | 10~35 | |
| Supply Voltage供电 | DC 24V(≥21A) | |
257nm激光器
LLQ257-15mw
LLQ257-15mw
全固态
257nm
的紫外激光
器
广泛用于紫外光固化，微电子，光盘雕刻，激光医疗，科学实验等
| Wavelength (nm) | 257± 1 | |
| Operating mode | Frequency conversion of Q-switched pulsed laser | |
| Max average power (mW)* | 1~ 15 | |
| Single pulse energy ( µJ) | 0. 1~4 | |
| Pulse duration (ns) | ~5 | |
| Peak power (kW) | 0.2~0.8 | |
| QCW | Between 2k-5kHz. | |
| Ave power stability (over 4 hours) | < 10%, <5%,<3% | |
| Transverse mode | Near TEM00 | |
| M2 factor | <2.0 | |
| Beam diameter at the aperture (mm) | Elliptical (4:1), Beam spot 0.5*2mm | |
| Polarization ratio | >50:1, (Horizontal or Vertical Optional) | |
| Warm-up time (minutes) | <5 | |
| Beam height from base plate (mm) | 70 | |
| Operating temperature (°C) | 10~35 | |
| Power supply (90-264VAC) | PSU-H-LED/PSU-H-FDA | |
| Warranty | 1 year | |
