威海豪跃自动化设备有限公司 已通过实名认证

 1：采用不受材料液体粘度变化影响的容积计量式钢性载入泵，可进行稳定高精度的计量吐出。

The device uses a rigid load metering pump,using the volume measurement method.Measurement accuracy will not be the glueviscositychangesintheprocess and ensures accurate and spit accuracy.

   2：当胶水含有较硬的填料时，可采用耐磨泵计量，保证长期使用不影响吐出精度及比率。

     We can use w use wear-resisting pump when the glue have a lot ofhardadditives.Toensurethelong-term use does not affect the precision and the rate of spit.

3：设备采用活塞泵进行计量，并增加二次计量装置，使吐胶精度以及工作效率更高，而且吐胶量和吐出速度都可触摸屏自由设定。

The equipment uses volume measurement method of piston.Andincrease the twice metering device, so thattheaccuracyofthespit glue and work more efficient, the quantity and speed of the glue can be set free directly by touch screen.

   4：选用动态混合时，采用新型混合器，伺服电机控制，转速可调，而且噪音很小。

       The dynamic hybrid, using a new type of mixer, servo motorcontrol,speedadjustable,andthe noise is very small.

   5：选用伺服驱动时，吐出量精度更高，而且吐出量和吐出速度可由触摸屏直接设定，更适合多品种工件的高精度吐出，并预留信号接口，可与机械手等自动化设备直接连接。

The servo drive, discharge amount of higher accuracy, and discharge amount and spit out the speed can be set by thetouchscreendirectly,highprecision and is more suitable for many varieties of workpiece spit, and reserve signal interface, can be directly connected with a mechanical hand and otherautomationequipment

   6：整体设备设计紧凑，使用操作简单方便。

The whole equipment has the advantages of compact design, simple operation