企业特殊行业经营资质信息公示
点击图片查看原图LL7835A
| Properties | InnoPlus LL7835A | Unit | Test Method |
| Physical Properties | |||
| Melt Index (190 oC, 2.16 kg) | 3.5 | g/10 min | ASTM D1238 |
| Density | 0.920 | g/cm3 | ASTM D792 |
| Melting Point | 118 | oC | ASTM D3418 |
| Vicat Softening Point | 105 | oC | ASTM D1525 |
| Film Properties* | |||
| Tensile Strength at Break (MD/TD) | 45 / 40 | MPa | ASTM D882 |
| Elongation at Break (MD/TD) | 850 / 900 | % | ASTM D882 |
| Tensile Modulus, 1% Secant (MD/TD) | 230 / 250 | MPa | ASTM D882 |
| Dart Impact Strength | 140 | g | ASTM D1709 |
| Tear Strength (MD/TD) | 300 / 400 | g | ASTM D1922 |
| Haze | 19 | % | ASTM D1003 |
| Gloss (45°) | 27 | - | ASTM D2457 |
| * film properties obtained from 25 microns film which was blown film extruded at blow up ratio 2.5 |
