企业特殊行业经营资质信息公示
营业执照已认证 
点击图片查看原图
一根被加热的棍传递热的液态的粘液以一种结构化的形式涂布到基布上。通常，这很多不同的参数可调整。Gravure Roller
ad
Pic 1
Pic 3
Pic 2
VarioRoll
Slot Die
Pic 1
Pic 4
Pic 2
Pic 3
DOTCOAT – HOTMELT SYSTEMS 德奥特－热熔系统
GRAVURE ROLL 凹棍式涂布
SLOT DIE 狭缝式涂布
FLEXO COAT 柔版式涂层
A-synchron - mode for
structured light weight
coatings. Gravure rol
speed lower than web
speed
非同步模式
Synchron - mode for
structured adhesive
patterns
同步模式
A-synchron - mode for
full width coatings.
Gravure roll speed
faster than web speed
非同步模式
SPRAY BAR 喷杆式涂布
2
A heated gravure roll transfers the hot and
thus liquified adhesive onto the substrate to
be coated in a structured form.
Most often, the adhesive is applied in dots,
nets or line – structures with many different
parameters.
一根被加热的棍传递热的液态的粘液以一
种结构化的形式涂布到基布上。通常，这
些粘合剂是点涂，网涂，或线涂－－并有
很多不同的参数可调整。
Melted adhesive is pumped through a heated
slot die.
At the lip of the slot die the adhesive is
applied to the substrate`s surface. Depending
on the amount of adhesive lay-down and
speed, the adhesive is transferred in open or
closed film structure.
热熔态粘合剂通过一个狭缝被抽出。在狭
缝的嘴唇处将粘合剂涂布到基布表面。不
同的粘合剂用量和车速，粘合剂以开式或
闭合式结构转移到基布表面。
A heated roll transfers the hot liquid adhesive onto
the substrate.
By a differential speed between substrate and
application roller, it is possible to decrease or
increase the application amount, thus decreasing or
increasing the coating weight.
FLEXO COAT System: icoating weight adjustment
• within seconds
• with the same gravure roll
• from 1– 200 g/m2
*depending on substrate and adhesive
一根热转移棍将热的液态粘合剂转移到基布。通
过控制基布和应用棍之间的速度，可增加或减少
粘合剂用量，从而增加减少涂层克重。此系统可
以应用同一根应用棍在几秒时间内调整涂层克重
1－200g/m2
The heated spray bar is fed by a gear-pump
with the liquified adhesive. The adhesive,
leaving the nozzle, is dispersed by pressurized
air. Without contact, the adhesive is transferred
to the surface of the substrate passing by.
Depending on speed and adhesive amount, an
open or closed adhesive layer can be created.
齿轮泵将液态粘合剂喂入加热的涂布喷杆。
这些粘合剂在压缩空气的作用下离开喷嘴而
均匀的喷撒出去。喷嘴没有接触基材，这些
粘合剂就转移到了基材的表面。通过控车速
